TefGold cartridges are manufactured from a membrane with uniform thickness, high pore volume, controlled pore size and designed for the removal of submicron organic and inorganic particulate matter. The overall characteristics of the membrane media ensure that particles equal to or greater than the rated pore size are retained on the membrane surface. The structural stability of the membrane media eliminates media migration and the release of particles smaller than the removal rating even under pulsing conditions.
Manufactured from a highly hydro-phobic Polytetrafluoroethylene (PTFE) membrane, TefGold cartridges are guaranteed to provide media integrity and high flow rates throughout their useful life. Combining exceptional resistance to chemicals with high thermal stability, TefGold cartridges are ideal for the most demanding microfiltration applications. Particularly suited for the filtration of aggressive chemical solutions including acids, alkalis, solvents and enchants,
TefGold cartridges can also be used for a wide range of sterile venting and the filtration of moist gases.
TefGold cartridges are constructed of a multi-layer of (PTFE) membrane and polypropylene support media, which are pleated and bonded together to optimize the filtration area while permitting efficient flow with low pressure drop.
Each TefGold cartridge, has an effective filtration area of 7.5 ft per 10” module. Overall cartridge integrity is achieved by the absence of glues, resins, bonding agents and wetting surfactants thus maintaining minimum levels of extractables.
TefGold cartridges are manufactured in a class 10,000 cloakroom.
Each TefGold clean cartridge is integrity tested and batch identified prior to shipping.
TefGold cartridges are available in either standard or ultra-clean, rinsed with 18mΩ water to provide rapid resistivity recovery rates.
TefGold cartridges may be steam sterilized in-line or autoclaves repeatedly at temperatures up to 250ºF
TefGold cartridges are available in single or multiple lengths of 10″, 20″, 30″ and 40″. Micron ratings are 0.1 , 0.2, and 0.45. TefGold cartridges, furnished with a wide range of end caps, gaskets and O-rings, are designed to fit existing filter housings without modifications.
Applications
- Microfiltration of process chemicals, providing users of fine chemicals with a contaminant free supply.
- Microfiltration of photoresists and development solvents.
- Microfiltration of Ultra-pure water.
- Microfiltration of moist gases.
- Sterile tank venting of pharmaceutical and fermentation processes.
Specifications
Micron ratings: 0.1, 0.2, 0.45
Media: Polyethersulphone
Support structure: Polypropylene
Outer Jacket: Polypropylene
Inner core: Polypropylene
End fittings: Polypropylene
Gaskets & O-ring: EPDM, Silicone, Viton, or Buna N
Dimension (nominal): 2 ¾” O. D. x 10″, 20″, 30” , 40″
Maximum differential pressure: (normal flow direction)
68°f (20°C) 87Ib/in2 (6.0 bar)
176°F (80°C) 57Ib/in2 (4.0 bar)
212°F (100°C) 43Ib/in2 (3.0 bar)
Cartridge treatment:
- Standard: Flushed without further treatment
- Rinsed: Ultra-clean, rinsed with 18 mΩ water
Sterilization: Autoclave, Chemical, In-line Steam (up to 240°F, 135°C)
Extractables: Minimal total extractables
Integrity testing: All cartridges are 100% integrity tested prior to shipment
Test Conditions – Typical Clean Water Flow Rate – based on a 10″ (250mm) single module NAFCO housing exhibiting the differential pressure characteristics indicated above, for solutions with a viscosity of 1 centipoise. For solutions with different viscosities consult factory for flow rates.
FAA Filter reserves the right to change design and/or specifications without notice.
FAA Filters can custom design a filter solution for your specific application. Please call 800 268-8943 and ask to speak to an Applications Engineer