REFILCO® PLH Series cartridge is designed to provide superior filtration in a wide range for fluid applications.
Utilizing advanced synthetic media pleated with epoxy coated wire backing. PLH Series cartridges can withstand long-term use without softening or deterioration, especially in the presence of water.
The combination of the multi-layer microglass and polyester media pleated with the rigid wire backing, optimizes filtration and flow capacities. The synthetic fiber matrix design increases pore volume per unit of area providing for high flow rates and precise filtration efficiencies.
The PLH series is available in a wide range of micron ratings to meet the demands for filtration of mineral oils, synthetic fluids, non-potable water, water based fluids and chemicals.
Features
- Multi-layer synthetic media with rigid wire backing
- Higher flow rates per unit area
- Long-term resistance to deterioration caused by water
- Superior particle separation eff iciencies
- Wide range of chemical compatibility
- High dirt holding capacity reducing maintenance cost
- Directly interchangeable with standard pleated paper cartridges
Performance
Efficiency Rating
Nominal***
0.5 μm
1.0 μm
3.0 μm
5.0 μm
10.0 μm
20.0 μm
40.0 μm
*** Contact FAA Filters for absolute efficiencies specific to your applications.
Applications
PLH Series cartridges are recommended for a wide range of industrial applications where increased structural integrity and performance are demanded.
- Turbine Lube Oil
- Compressor Lube and Seal Oil
- High Water Based Fluids
- Cutting Coolants
- Fuels
- Diesel*
- Terminal Storage
- Backup Generator
- Gasoline
- Duel Fuel Engine Turbine Lube
- Hydraulic Oils
- Rolling Mill Oil
- Chemicals
- Glycols and Amines
* See FAUDI Diesel literature for more details
** Contact FAA Filters for absolute efficiencies for your specific applications.
Operating Limits
-
Max. Operating Temperature: 250 °F / 121 °C
-
Min. Operating Temperature: -20 °F / -7 °C
-
Collapse Pressure: 75 PSID / 517 kPa
-
Recommended Change-out: 25 PSID / 172 kPa
Cartridge Construction
Cartridge Component
Gasket (A)
- Buna N*
- Cork**
- Fiberboard**
- Neoprene**
- Silicone**
- Viton ® **
Filter Media
- Resin impregnated cellulose fiber
Inner/Outer Body (C)
- Corrosion resistant plated steel*
- Stainless steel**
End Caps (D)
- Corrosion resistant plated steel*
- Stainless steel**
Bonding (E)
- Plastisol*
- Urethane**
- Silicone**
- Epoxy**
* standard ** option
PLH Series Product Line
Series
PLH 310
PLH 330
PLH 418
PLH 424
PLH 512
PLH 518
PLH 607
PLH 608
PLH 614
PLH 618
PLH 629
PLH 636
PLH 644
PLH 656
PLH 718
PLH 736
OD (in.)
2 5/8
2 5/8
4
4 1/2
4 1/2
6
6
6
6
6
6
6
6
6
6
6
OAL (in.)
9 3/4
29 5/8
18 1/4
24 1/8
12
17 7/8
7 1/2
8
14 1/2
18
29
36
44
56
18
36
Replaces
Hilco
Hilco
Purolator
Purolator
Purolator
Kaydon
Purolator
Purolator
Facet, Fram, Velcon
Facet, Velcon
Facet, Velcon
Facet, Velcon
Facet, Velcon
Facet, Velcon
Hilco, Facet
Hilco, Facet
The table above represents only a portion of the many different size PLH cartridges manufactured. Please contact FAA Filters for detail on our complete product line.
Cartridge Part Numbering
PLH 614 - 5 10
| PLH | Media Type: PLH = Pleated Synthetic (Other media types available) |
| 614 | Nominal size (see chart above) ½ = ½ μm 1 = 1 μm 3 = 3 μm 5 = 5 μm 10 = 10 μm 20 = 20 μm 40 = 40 μm |
| 5 | Nominal micron rating*** |
| 10 | Design option code, contact FAA Filters |
